ciscoasa# conf t

ciscoasa#(config-if)#

interface fastethernet0/1 /進入介面F0/1子配置模式 interface Ethernet0 /進入乙太網口0子配置模式 no shutdown /啟用介面

speed ? /檢視speed命令的子命令

speed 100 /設定該埠速率為100Mb/s

dulplex full/half/auto /設定該埠為全雙工

description TO_PC1 /設定該埠描述為TO_PC1

show interface fastethernet 0/1 /檢視埠0/1的配置結果

show interface fastethernet 0/1 status /檢視埠0/1的狀態

ciscoasa#

iscoasa(config)# interface gig

ciscoasa(config)# interface gigabitEthernet 0/0

ciscoasa(config-if)# spee

ciscoasa(config-if)# speed ?

interface mode commands/options:

10 Force 10 Mbps operation

100 Force 100 Mbps operation

1000 Force 1000 Mbps operation

auto Enable AUTO speed configuration

ciscoasa(config-if)# speed