Transfer belt bias error The feed back bias from the transfer belt is more than 4V for 60 msec while the transfer belt bias is output. The A/D conversion level is 20 or less for 60 msec. The PWM duty is 24% or more for 60 msec. Causes
• Power pack broken • Defective harness • Disconnected connector 轉印帶問題 具體應該是轉印帶下面那個傳感器髒了
Transfer belt bias error
The feed back bias from the transfer belt is more than 4V for 60 msec while the transfer belt bias is output. The A/D conversion level is 20 or less for 60 msec. The PWM duty is 24% or more for 60 msec.
Causes
• Power pack broken • Defective harness • Disconnected connector 轉印帶問題 具體應該是轉印帶下面那個傳感器髒了